Description
















Does Anker SOLIX C300 Portable Power Station need to be recharged before its first use?
Recharge before activating for the first time with these methods:
1. PD: Use a 9V charger or higher.
2. MPPT: Use solar panels with output correct between11-28V.
3. AC charging.
When finished, unplug the AC cable and power on or off as needed.
What should I keep in mind when using a solar charger to charge Anker SOLIX C300 Portable Power Station?
Only use 11-28V solar panels with an XT60 connector. It is incompatible with Anker SOLIX PS30 (or other 5V~3A USB-C panels), PS200, PS400. We recommend 100W or 60W Anker Solar Panels.
Warning: Anker Panels over 100W will cause a device malfunction.
Are the USB-C ports for C300 input (charging) only? What is the output power of the USB-C1 and USB-A ports?
Input/Output:
USB-C1 / USB-C3: Output only; USB-C2: Input/Output.
Maximum Output:
USB-C1 and USB-A Simultaneously: 20W; USB-C1: 15W; USB-A 12W.
What is the maximum AC output power of the C300 and how long can it run connected devices?
The AC outlets can deliver a maximum of 300W rated power to connected devices. The actual runtime of the C300 will vary depending on the devices connected, as battery conversion efficiency must be taken into account.
How do I obtain car charging and solar charging cables?
The car charging and solar charging cables can be purchased separately. Contact the Anker support team for more information.
| Brand | Anker |
|---|---|
| Wattage | 300 watts |
| Fuel Type | solar |
| Power Source | Battery Powered, Solar Powered |
| Recommended Uses For Product | Camping, Residential |
| Voltage | 220 Volts |
| Output Wattage | 600 |
| Special Feature | Portable |
| Included Components | Anker SOLIX C300 Portable Power Station, AC Charging Cable, Safety Manual, and Warranty Info |
| Color | Dark Gray |
| Product Dimensions | 6.46"L x 6.34"W x 9.45"H |
| Model Name | Anker SOLIX C300 |
| Engine Type | 4 Stroke |
| Ignition System Type | Electronic |
| Runtime | 50 minutes |
| Total Power Outlets | 8 |
| Frequency | 60 Hz |
| Current Rating | 10 Amps |
| Engine Power Maximum | 600 Watts |
| Starting Wattage | 300 Watts |
| Running Wattage | 300 Watts |
















Does Anker SOLIX C300 Portable Power Station need to be recharged before its first use?
Recharge before activating for the first time with these methods:
1. PD: Use a 9V charger or higher.
2. MPPT: Use solar panels with output correct between11-28V.
3. AC charging.
When finished, unplug the AC cable and power on or off as needed.
What should I keep in mind when using a solar charger to charge Anker SOLIX C300 Portable Power Station?
Only use 11-28V solar panels with an XT60 connector. It is incompatible with Anker SOLIX PS30 (or other 5V~3A USB-C panels), PS200, PS400. We recommend 100W or 60W Anker Solar Panels.
Warning: Anker Panels over 100W will cause a device malfunction.
Are the USB-C ports for C300 input (charging) only? What is the output power of the USB-C1 and USB-A ports?
Input/Output:
USB-C1 / USB-C3: Output only; USB-C2: Input/Output.
Maximum Output:
USB-C1 and USB-A Simultaneously: 20W; USB-C1: 15W; USB-A 12W.
What is the maximum AC output power of the C300 and how long can it run connected devices?
The AC outlets can deliver a maximum of 300W rated power to connected devices. The actual runtime of the C300 will vary depending on the devices connected, as battery conversion efficiency must be taken into account.
How do I obtain car charging and solar charging cables?
The car charging and solar charging cables can be purchased separately. Contact the Anker support team for more information.
| Brand | Anker |
|---|---|
| Wattage | 300 watts |
| Fuel Type | solar |
| Power Source | Battery Powered, Solar Powered |
| Recommended Uses For Product | Camping, Residential |
| Voltage | 220 Volts |
| Output Wattage | 600 |
| Special Feature | Portable |
| Included Components | Anker SOLIX C300 Portable Power Station, AC Charging Cable, Safety Manual, and Warranty Info |
| Color | Dark Gray |
| Product Dimensions | 6.46"L x 6.34"W x 9.45"H |
| Model Name | Anker SOLIX C300 |
| Engine Type | 4 Stroke |
| Ignition System Type | Electronic |
| Runtime | 50 minutes |
| Total Power Outlets | 8 |
| Frequency | 60 Hz |
| Current Rating | 10 Amps |
| Engine Power Maximum | 600 Watts |
| Starting Wattage | 300 Watts |
| Running Wattage | 300 Watts |
| Barcode | 194644298845 |
| MPN | A1723311 |